|
| Ticket # | Date/Time | Question |
| 148593 | 9/21/2006 2:18:44 PM | My name is Bill Kralicek I live in Lombard, Ill. The McCleod clutch didn't hold up too well, for I'd spun the splines flat in the disc hub. I want to go back to single disc. Need info / part numbers for entire set-up from flywheel to throw out bearing. It's mainly street driven, but I beat the crap out of it all the time.
I hope to see some strip action too. |
| 148096 | 9/12/2006 4:59:34 PM | Hi I recently bought a competition clutch kit part #HAY-85-125 from you. I love how it shifts and performs. The quality of it is wonderful. I will recomend your parts to anyone looking for high quality parts. The only thing I am missing is window decals and a XL t-shirt. My address is 3360 Allen Street Easton PA 18045.
Thanks a lot Scott Lameo |
| 146587 | 8/16/2006 2:37:11 PM | Hello, I would like to find out what clutch I should get for my truck and the cost. I heard that hayes clutches are the best and I will not settle for anything less. |
| 124582 | 8/5/2005 11:28:41 AM | I have flywheel part # 12-240. Will pressure plate part # 39-602 bolt up to this flywheel? thanks Bruce Faulkner. |
| 105556 | 8/5/2004 5:07:13 PM | I purchased a pressure plate (part # 39-610) and clutch disc (part#49-118) a year ago, but the pressure plate had no SFI sticker on it. Your tech guy told me before I bought it that this clutch was indeed certified. I need the SFI Serial # to pass NHRA tech. How do we rectify this problem. Thanks, |
| 105548 | 8/5/2004 3:10:09 PM | Can you recertify a part # 22-630 flywheel? I bought it over 12 years ago, but it hasn't seen much racing time. It would probably need the bronze insert replaced and then be re-certified.
What does it cost to have the insert replaced and then recertified. where do I send it and how long does it take.
I also just purchased a pressure plate (part # 39-610) and clutch disc (part#49-118) a year ago, but the pressure plate had no SFI sticker on it. Your tech guy told me before I bought it that this clutch was indeed certified.
I need the S... |
| 104709 | 7/20/2004 6:59:15 PM | Hi, does Hays still make an 11 inch, Long style, double disk clutch assembly like they made in the 1960's for a front engine fueler? If so, could you please inform me of the part number and price? This is for a Cacklefest car. Thank you.........Chuck. |
| 69555 | 3/2/2003 12:00:00 AM | I have one of your aluminum flywheels with the steel insert and was needing it replaced, can you do this and if so how much and where do I send it? |
| 69358 | 2/25/2003 12:00:00 AM | I have one of your aluminum flywheels with the steel insert and was wondering if you can install a new one, if so where do I send it and how much is it? |
| 65595 | 2/18/2003 12:00:00 AM | One of my employees races the above car and is interested in the Hays Torwue Lock 9 flywheel and clutch assembly. He needs the Chevy 153 toothe application with a 11/8x26 spline. Part number 29-2321. Can I please have any available tech information on this part as well as the current distributor cost on this part? Thank you in advance for your time in consideration of this request.
Ron Colvin |
| 64812 | 2/5/2003 12:00:00 AM | do you list a flywheel for an amc? do you have cluch and pressure plates for the same, and last do you
have a blow shield for an amc
Thank you
Ed Wesolowski |
| 61516 | 12/8/2002 12:00:00 AM | I am using one of your steel flywheels # 10-130. Is there an 11" street disc still available for this flywheel? TIA |
| 59221 | 11/18/2002 12:00:00 AM | I purchased a Hays clutch and pressure plate. It's the diaphram type (not the Borg Warner) pressure plate. My installation instructions that come with it state "8. Remove the lever blocks after installing the pressure plate. Do not leave the lever blocks in the clutch assembly!" I don't see any blocks. Am I missing something? |
| 58068 | 11/2/2002 12:00:00 AM | I recently bought a mustang. The clutch cable on it is incorrect. I found that it has a Hays clutch quadrant and I was wondering if you make a replacement cable. The quadrant itself is silver. If you do make it what is the part number, how much is it and where can I purchase it? Thankyou. |
| 56188 | 10/12/2002 12:00:00 AM | Good morning, About a year ago I bought a Pro-Matic 2 shifter from a local auto store I have not installed it yet, when I opened the box to install it I found that the black console was broken right out of the box(new). The local parts store will not do any thing about it,I was woundering if Hurst could send me a new one or if I have to buy a new one,the part # is 129-8554.
Thank You. A long time faithful coustmer.
MARK. |
| 56018 | 10/11/2002 12:00:00 AM | What weight flywheel would provide the best performance?
Thanks
Chris
|
| 55989 | 10/10/2002 12:00:00 AM | Sirs,
I would enjoy a hard copy of your product line catalog. Also if you could send me information on being a dealer for your product you could include that as well.
Thanks,
Jeff Hedlind
PMB 167
1574 Coburg Rd
Eugene, OR 97401 |
| 55587 | 10/9/2002 12:00:00 AM | Do you offer an aluminum flywheel for a 2002 Firebird Formula Firehawk with an M6 trans? If so, what is the weight of the flywheel? Also, do you know the weight of the stock flywheel? Thanks in advance. |
| 55563 | 10/8/2002 12:00:00 AM | what would be the best cluth for my car? |
| 55542 | 10/8/2002 12:00:00 AM | I have been putting this car together for the past 3 years. I got one of your clutch sets from Jegs(Borg/Beck, 10 1/2 inch, street/strip) for Chistmas this past year. I finally put it in the car last month. Immediately I noticed a raspy sound when the clutch was partially engaged. It sounded like a throwout bearing problem, so I replaced it. It didn't change. I then put about 2 miles on the car thinking a little use might clear it up, but there is no change. I then had to load the car on a trailer and the clutch began to slip and burn, ... |
|